Remember this Guy?

I sure miss Maggila...he was the bomb!  They don' t make em like this anymore.

Basement Adjustments

Well, I had a complaint about cold feet in the basement (I'm not going to rat him out) so I decided to make an adjustment to hopefully take care of the issue.  I did take a temperature reading and the basement is running 1-2 degrees colder than the main floor of the house at floor level.  I'm not sure I will be able to completely correct the differential but I decided I would give it a try. 

I ended up running a new branch of duct for the heating and cooling system on one end of the basement and it went so well that I may run another on the opposite side of the basement tonight.  The unfinished side of the wall is ugly but the living side looks like the register has been there all the time.  Who really cares what the side looks like that no one really sees anyway?  The whole job took less than an hour and the one I'm going to run tonight will take even less time.  Here are a few pictures; most of you will be bored but if you are....don't look!

Helper Katie putting her two cents worth in.

Register boot on the unfinished side of the wall

Cut for the trunk line boot

Rather ugly duct tape job on the main truck boot but I couldn't find my Aluminum duct tape (only temporary)

Duct running and connected to the boots

All Finished!

Big Day for Katie

Our almost 4 year old going on 17 had a big day on Saturday.  She looked at Lisa and me and said "Let's go get my ears pierced".  Now those word also came out of her mouth a couple of weeks ago as well only to tell us "not today".  Since we were looking for something to do anyway, we headed out to the mall and no backing out this time.  Katelyn was so rock solid, no tears were shed (not even a sign of a watery eye).  Lisa, well that was another story.

Picture a crowd of about 12 or so gathering around to watch this tiny 3, almost 4, year old getting her ears pierced.  I'm sure it's some kind of sickness that all these people wanted to see a little girl cry her head off but nothing.  Then all of a sudden we hear someone in the crowd say she's not crying but look at her momma!  Yep, Lisa was wiping a tear away when I turned to look at her.

Waiting patiently

Marking her ears

The big moment

No tears!

Odds and Ends

Blogging has become a rarity as of late, sorry about not updating as much as I should or would like to.  Summer has come and gone, Shawn's already finished with his first grade period of the year and work has gone from slightly hectic to very face paced. 

With Halloween right around the corner, I decided to do a quick post of our recent activities.  Lisa and I went to a Halloween party and played dressed as Nun and Monk.  I really dislike costume parties but this one was okay.  I guess if everyone looks like fools I really don't mind looking like one as well. 

Shawn and Katelyn made a trip to the Zoo for some early trick-or-treating at with Nana, Logan, Skylar and their Grandmothers.  Katelyn is really into all the holidays this year and it's really enjoyable to watch.  Unfortunately, Sunday morning, Katie woke up with an always pleasurable case of pink eye.  We ended up spending a little time at Urgent Care and waiting for a prescription but after that...off to the pumpkin patch. 

Sorry about the short post but I hope to make it up in pictures!

Shawn and Katie posing at Doyt Perry Stadium (BGSU)

Katie running down the field

Logan, Shawn and Katie at the Zoo

A Motley Crew at the Zoo

Pink eyed Kate

In the patch

 

 

 

Pony ride at the pumpkin patch

I think the monk had too much to drink of the nun talks too much!

My Science Project is Done for Now

The draft system is complete for now.  I still need to do something a bit more permanent with the shank box by attaching better than it is now.  The cooler seems to be holding at a pretty consistent temperature but the beer is taking some time to get to a nice drinking temperature.  I can fit either four 5 gallon corny kegs in it or one corny keg and a 1/2 barrel and the CO2 bottle still fits fine.  Here's a few pictures as it looks now below.

Shawn also had his first cross country meet of the year.  I'm pretty sure the team won his age group but we left before the results were posted.  Shawn ended up 100th out of what I would guess 150-165 boys.  Not bad considering he is now running with 4th-6th graders and he's a 4th grader.  He seemed to peter out during the last 150 yards and let a few boys pass him.

Here's Shawn after about his first half mile

Beer lines and recirculation tube run out of the cooler to a Styrofoam cooler 

My recirculation blower is mounted in the middle and move cold air up a duct and to the back of my faucets

Point where the recirculated cold air and the beer lines run out of the cooler and up a PVC tube to the back of the faucets

Gas distribution valves and CO2 tank/regulator

Temperature controller

New Kegerator build Day one

Well, the final step in the basement project is to build a more reliable, as far as temperature control and a slightly larger capacity beer cooler to supply the taps I built into the bar.  Today my recirculating fan and temperature controller finally arrive and I started the process of converting our old 7 cubic foot chest freezer into a beer cooler.  Of course the first thing I had to do is buy a new chest freezer to replace the one I'm butchering up for the sake of beer.

Tonight I build and installed the collar that will give the freezer additional depth as well as a place to drill holes for things like the beer lines, CO2 lines, temperature controllers and the like.  I'm still torn on if I will keep the CO2 bottle inside the cooler or outside.  I will have plenty of room to keep it in the cooler along with 4 of my 5 gallon homebrew kegs so I think I'm leaning on the inside to cooler option at this point unless someone can tell me why I shouldn't.

I build the collar out of cedar 1X8 lumber.  I cut the boards at 45 degree angles and then attached the pieces with small brads, L brackets and filled the gaps with silicone.  I then used silicone to attach the collar to the freezer frame.  I also used the silicone to seal the collar to the frame where the two meet.  Once I let the silicone set for a bit, I reattached the freezer lid using the original hinges and some wood screws.  Tomorrow night, I will run the beer lines, install and wire the recirculation blower and the temperature controller.  I will also mount the gas splitter inside the freezer on the collar.  Then it will be beer time.

Below are some pictures so far:

  Just your typical chest freezer

Nothing special

The Collar 

Checking the fit of the lid (nice dent but I swear it was like that when we got it)

Collar installed on the freezer frame.  A pretty good fit too.

Inside view

Hinges reinstalled (notice the holes where the flanges were attached originally)

All seems to function well up to this point.  

My project is functional too!

I finally hooked up a keg for a test and the draft system works!  The pour was lousy but it works nonetheless.